Are you a bit interested in this portable machine (can produce both elastic & non-elastic rope) while afraid you won’t know how to use it? Don’t worry, this machine is exceptionally easy to set up and operate. Follow me.

1. Take the machine and all the parts out of the box and place it on the workbench

2. Unscrew the four screws on the top of the machine with a suitable hexagonal screwdriver

3. Attach one bracket each

4. Tighten the 2 horizontal brackets from the bottom upwards as shown in the picture

5. Fix the tensioner

6. Attach the head to the machine and tighten the bottom screw

7. Attach the round belt

8. Adjust the loop to an approximate position

9. Arrange the yarn according to the path shown

10. Adjust the position of the loop again so that it is easy to guide the yarn through the needle.

11. Pass the yarn through the hook of each needle and make a complete loop

12. Press the yarn under the head onto the wheel

13. Adjust the white line on the two speed buttons towards the lower left corner to low speed, with the power off.

Adjust the speed of the thread wheel with the left knob and the speed of the machine head with the right knob.

14. Plug in the power supply and turn on the switch.

15. The machine starts to run. Try the best speed for the different yarn.

You might want to know what rope it can produce?

It can produce both elastic belt for mask . Well, non-elastic hollow rope in round or flat such as polypropylene rope, cotton rope, etc. is no problem.

Any questions about cord making you want to clear? Please contact us.